Our Snaffle Bits are all solid stainless steel unless otherwise noted. The simple snaffle bit applies pressure to the horse tongue in a pinching manner to aid in controlling the horse. The french link snaffle makes the pinching milder.
D-RING SNAFFLE WITH COPPER & STAINLESS STEEL ROLLERS
The D-RIng Snaffle has alternating Copper and Stainless steel Rollers. The top to bottom of the D is 3 1/2". The D is 3" across. The alternating copper and stainless steel rollers will prevent the horse from taking bit between his teeth. It also seems to encourage relaxation in the lower jaw.
Sizes: 6", 6 1/4", 6 1/2"
SD-113 D-RING SNAFFLE
The 5 1/2" stainless steel mouth is 3" - 3 1/2" high and 2" -2 1/2" across the D shape. The picture does not accurately reflect the shape of the D for these sizes.
This D-Ring Snaffle gives slight directional assistance, making use of the face of the horse, similar to that of the full cheek snaffle. The D-ring does not pinch the corner of the mouth.
Stainless Steel Sizes: 5 1/2"
SINGLE TWISTED WIRE SNAFFLE BIT-STAINLESS STEEL
This stainless steel bit is used to lighten the response when a horse becomes heavy on the bit. The twisted wire irritates the corners of the mouth more than a smooth bit.
Size: 7 1/4"
DOUBLE TWISTED WIRE SNAFFLE BIT- NICKEL PLATED
This is a strong bit used to lighten the response when a horse becomes heavy on the bit. The double twisted wire irritates the corners of the mouth more than a smooth bit.
Nickel plated over steel
3 inch loose ring cheek pieces
DOUBLE TWISTED WIRE SNAFFLE BIT - STAINLESS STEEL
This is a strong bit used to lighten the response when a horse becomes heavy on the bit. The twisted wire irritates the corners of the mouth more than a smooth bit.
FLAT RING SNAFFLE BIT
4" Flat Ring, rounded on the edges .
Sizes: 6", 6 1/2", 7"
LOOSE RING FRENCH LINK SNAFFLE BIT
The french link uses tongue pressure to encourage the horse to go on the bit. The copper taste of the link is a pleasing taste for the horse. The bit with a tasteless stainless steel link has 3 1/4" rings.
Copper Link - 5 1/2"& 6"
Stainless link - 6"
Click "Add To Cart" to see what is available
TOM THUMB SNAFFLE with COPPER & STAINLESS STEEL ROLLERS
The mouth has alternating copper and stainless steel rollers. The copper roller is 5/8" long x 1/2" across, and the stainless rollers are 1/2" long x 1/2" across. The sides are 7 1/4" long with 3/4" rings, 5/8" slots for inside measurements. The roller beads will prevent the horse from taking bit between his teeth. They also give the horse something to play with with their tongues. The mouth is 12mm 1/2" at the sides. Size: 6", 6 1/4", 6 1/2" ,6 3/4", 7"
TOM THUMB SNAFFLE BIT
8 1/2" side pieces
Stainles Steel Mouth Sizes: 5 1/2", 6", 6 1/4", and 6 1/2"
7" with 4" Shanks
LOOSE RING OVAL LINK SNAFFLE
A loose ring snaffle made with a German Silver mouthpiece. German Silver is an alloy made from 65% copper, 12% nickel, and 23% zinc, and is superior to stainless steel. It's high copper content oxidies and encourages softness. It has 3 inch rings, and a thick oval link.
Sizes: 5 1/2"
JOINTED TEAM BIT - STAINLESS STEEL
The simple snaffle bit applies pressure to the horse tongue in a pinching manner to aid in controlling the horse. Stainless steel, 3 inch rings.
Sizes: 5 1/2" & 6"
JOINTED TEAM BIT - NICKEL PLATED
The simple snaffle bit applies pressure to the horse tongue in a pinching manner to aid in controlling the horse. Available in Nickle Plated over Malleable Iron with 3 Inch Rings
Sizes: 5 1/2", 6", & 7"
Copper Mouth Full Cheek Bit
Full Cheek Copper Mouth Snaffle
Size: 5", 5 1/4", 5 1/2", 5 3/4", 6"
EGGBUTT DR BRISTOL SNAFFLE BIT
Eggbutt Dr. Bristol Snaffle Bit
Cheek pieces are 3 1/4 inches tall, 2 3/4 inches wide, link is 2 1/2 inches
The Eggbutt The eggbutt is a fixed cheek bit, this may be useful for horses that are a bit unsure of the bit as it doesn’t move around to much in the mouth, it should encourage the horse to stretch into the contact. An eggbutt bit would be less suitable if your horse is prone to leaning or taking hold of the bit
Dr Bristol This mouthpiece has 2 joints, which means the pressure of the bit is distributed over both the tongue and bars of the mouth. Because the mouthpiece has two joints, it shouldn’t cause any interference with the roof of the mouth. The Dr Bristol uses tongue pressure to encourage the horse to go on the bit, the flat shaped lozenge centre piece is set at an angle therefore causing a sharper, more pronounced pressure to the tongue, this bit will not encourage a true contact although may be useful if you need that extra bit of help in order to slow down or stop, it has bar and lip pressure but not a ’squeezing’ action like that of a bit with a single joint. The more joints a bit has the less likely the horse is to lean as the bit becomes more mobile.
Size: 6", 6 1/2"
SINGLE TWISTED WIRE SNAFFLE BIT-NICKEL PLATED
This nickel plated bit is used to lighten the response when a horse becomes heavy on the bit. The twisted wire irritates the corners of the mouth more than a smooth bit.
Nickel plated over steel
EGGBUTT SNAFFLE BIT
Side pieces are ovals 3 1/2" high, 3" wide
A mild bit that will not pinch the corners of their mouths. The design ensures that the bit will remain fixed and allows no up and down movement. The Stainless Steel oval shaped rings will not normally pull through the mouth. For a well behaved horse.
Sizes: 5 1/4", 5 1/2", 6", 6 1/2", 7"
KNS-280 HANGING CHEEK JOINTED MOUTH WITH FRENCH LINK
Hanging Cheek Snaffle with French link
Sizes: 6", 6 1/2"
SW-3999 Hanging Cheek Snaffle with Cuprium Link
Hanging Cheek bit with Cuprium link
sizes: 5 1/2, 5 3/4", 6", 6 1/2" and 7"
EGGBUTT SLOW TWIST SNAFFLE BIT
Side pieces are ovals 3 1/2" high, 3" wide Stainless Steel, large oval shaped rings that will not normally pull through the mouth. The twisted mouth offers more attention getting power that the standard snaffle mouth. Sizes 5 1/2", 6", 6 1/2"
EGGBUTT FRENCH LINK SNAFFLE BIT
Side pieces are stainless steel oval shaped rings 4" high x 3" wide that will not normally pull through the mouth. For a well behaved draft, this is a milder bit than the snaffle. The link softens the nutcracker effect of the snaffle mouth to their tongue.
EGGBUTT DOUBLE TWIST SNAFFLE BIT
Side pieces are ovals-3 1/2" high outside and 2 3/4" inside, 2 3/4" wide outside and 1 3/4" inside. The stainless Steel, eggbutt rings will not pinch the corners or pull through the mouth. Mouth thickness is 15mm. This bit has two twists on each side of the snaffle mouth.
FULL CHEEK SNAFFLE BIT
Eggbutt mouths- will not pinch corners of mouth. Great for Riding Drafts that have a problem with the bit "pulling" through their mouths. Does not offer much in stopping power. If stopping is a problem try a bit with a curb chain and port such as the Kimberwick low port. 8" Cheek piece, 2 1/2" ring Sizes: 5 1/2", 6", 6 1/2", or 7"
FULL CHEEK SLOW TWIST SNAFFLE BIT
This stainless steel Full Cheek Slow Twist Snaffle is a bit that applies pressure on the cheek to aid in steering. The Slow Twist mouth helps keep the horses attention. 8" Cheek piece with a centered 2 1/2" ring Sizes: 5 3/4 ", 6", 6 1/2"
CHELTENHAM GAG SNAFFLE BIT
This snaffle is effective because it allows the mouthpiece to drop more easily when the pressure on the rein is released.
The ring, with its big size, comes in contact with a large area of the cheek, to help reinforce directional changes,
and adds strength to the action of the bit.
Mouth is 15mm at the cheek piece. Sizes: 6", 6 1/4" and 6 1/2", 6 3/4", 7"
JOINTED KIMBERWICK BIT
Stainless Steel, comes with Curb Chain and hooks. The jointed snaffle makes this is good bit to use on your hard to stop Draft. Also offers good lateral control of horse. The cheekpiece is 5" high x 3" across. Sizes: 5 1/2"
BUTTERFLY COPPER FRENCH LINK SNAFFLE BIT
Sizes: 5 1/2", 6", 6 1/2", 7", 7 1/4"
HANGING CHEEK with FRENCH LINK Snaffle
This stainless steel Hanging Cheek French Link Snaffle tends to apply slight poll pressure in addition to the lips, tongue and bars. This encourages a lower head carriage. A milder bit than the single jointed Hanging Cheek snaffle. 4" Cheek piece with 2 3/4" larger ring,and 1" smaller ring
Sizes: 5 1/2", 6, 6 3/4", 7, 7 1/4"
PELHAM with JOINTED RUBBER MOUTH BIT
Cheek pieces are 6" from the top of the ring with the chain to the bottom The middle ring is 2 inches wide. The bottom ring is 1"
This bit is made out of stainless steel with a rubber mouthpiece
Rubber Mouthpieces have a warmer feel to the horse’s mouth. Horses that do not easily accept stainless steel will sometime accept rubber. The rubber mouthpiece is also useful for a horse with sensitive bars or tongue. The rubber mouthpiece is a milder alternative than stainless steel because the mouthpiece is normally thicker; therefore the pressure is distributed over a larger area. A rubber bit may however be unsuitable if your horse has thicker fleshy lips and/or a large tongue.
Sizes: 6 inches, 6 1/2 inches
The surgical quality bits are made of the world's finest 18-8 (chromium/nickel) stainless steel. This alloy is best for bits because it extremely strong and resists salt and acids in saliva, and will never rust or spot.
Sizes: 6" and 7"